The composition of small electric boiler is ingenious: electric boiler is an indispensable heating gas in winter
1. That is to say, the important electric boiler should not be placed around the inflammable materials (paper, cloth and other inflammable materials), so as to reduce the occurrence of fire from the source.
2. If the electric heater is not installed with plug, the plug is not unplugged and the resistance wire is overloaded, or the plug power wire is aged, it may also cause fire.
3. When using the electric heater, there should always be someone around. When unplugging the plug, many people are not used to unplugging the switch, but this will give a chance to develop a fire. Then
4. In case of sudden power failure, unplug the electric heater, and in case of sudden increase of power and fire.
Before the electric boiler, carefully check the electric boiler part of each system. The three safety control pressure gauges, safety valves, air supply pipe fittings and water level gauge are normal. After that, everything is correct. Put on clothes and continue to work according to the clothing regulations.
When filling the electric boiler, please do not operate it with one hand. The regulating action is to open the water valve with one hand and the ejector valve with the other hand. When the water is poured into the specified water level, the valve shall be closed first (when the valve is closed, the valve face shall not be facing the water to avoid damage to the valve face), then the water valve shall be opened, and the warning sequence shall not be reversed.
When the electric boiler works, the water level and pressure gauge must be constantly looked around, without any negligence. The night shift adjusts the hour rest, and the night shift works. During the day, there must be a good rest, so you can't sleep at night, because once there is any carelessness, there will be an accident.
Every night, the electric boiler shall be subject to sewage treatment, and the water level gauge shall be cleaned every night. The mechanical equipment such as motor shall be inspected regularly, and if any abnormality is found, it shall be inspected immediately. Check the safety valve every week.